Have you changed rubber seals in your 912? Read the comments below from other 912 owners. New! 912 Registry Members can share technical information, add technical information, and access quality, up to date technical information on our 912 Wiki.

Windshield replacement:

From: Jules ; Put the trim on before you install the windshield. First wrap the seal over the windshield. Then insert the trim into the seal. Next, install the whole deal. Remember to use soapy water and some wax cord to get the seal over the lip. You will need a helper to apply pressure from the outside while you pull the cord. Happy Motoring
-Jules

From: Ed; Be careful about the little clips used to hold in the headliner. When I bought my 912, it had this little whistling noise coming from the middle of the windshield on top. When I replaced the glass, it turns out a clip was bent wrong allowing the wind to whistle thru the rubber.

Quarter Windows

Q: from Reza I have a '67 912 that is in dire need of new weatherstripping mostly on the outside of the quarter windows, but also the other windows as well. 1) Where do I order these/how much do they cost? 2) How do I go about removing the old and putting the new in. If the process is too long for a post, then does anyone know a link to online help? Any help is appreciated. Thanks.  -Reza

Other 912 Restoration Topics

This site is not associated with Porsche Cars North America, Inc., or Dr. Ing.h.c.F.Porsche, AG. Porsche, Targa, Boxster are registered trademarks of Dr. Ing.h.c.F. Porsche, AG. Other product and company names mentioned herein may be the trademarks of their respective owners.

© 1997- 2006 912 Registry. All rights reserved.  Please send suggestions and comments to the Webmaster.  Legal Notice